The working life of a DC servo motor depends on a variety of factors, such as the operating environment, working load, maintenance situation, etc. of the motor.
Generally speaking, the service life of DC servo motors can reach tens of thousands of hours, but in practical applications, the service life of the motor may be shortened due to the influence of various factors.
Therefore, in order to extend the service life of DC servo motors, regular maintenance is required, such as cleaning the inside of the motor, replacing the oil seal, checking the motor bearings, etc. At the same time, it is also necessary to reasonably select the model and specification of the motor according to the specific use of the motor to avoid overload and improper use.
How to increase the working life of DC servo motor?
Here are some ways to increase the working life of DC servo motors:
1. Check before starting to ensure that the power supply voltage and the motor model or current setting value on the drive controller are within certain regulations.
2. Add and replace the lubricating oil regularly, and keep the oil quantity of the motor spindle lubrication constant temperature oil tank within the specified range.
3. Clean regularly and take protective measures to keep the motor and its surrounding environment clean and dry.
4. Avoid overload, do not exceed the rated load of the servo motor, so as to avoid excessive wear and damage.
5. Control the temperature, avoid installing the motor in a high temperature environment, and take measures to control the temperature of the motor if necessary.
6. Pay attention to protection, prevent the motor from external impact or vibration, and take appropriate protective measures.
7. Correct use, when using the servo motor, be sure to carefully read and abide by the relevant operation manual and safety regulations to avoid misoperation or damage to the equipment.