After buying an imported or domestic servo motor, the installation problem is also a very important aspect. Many people are prone to various problems if they do not pay attention when installing. In view of this problem, several problems that need to be paid attention to when installing servo motors are introduced. This makes it safer and simpler to use.
1. The servo motor is not suitable for installation in oily and humid places, although it also has a high protection level. However, for a long time in a place with a lot of water or oil, it is not conducive to the service life of the motor after all. This is required before installation. There are a few things to know when installing.
If the servo motor is connected to the reducer, an oil seal should be added when using the servo motor to prevent the oil of the reducer from entering the servo motor.
2. Ensure that the cable is not affected by external bending forces or its own weight, especially at the cable outlet or connection.
3. Ensure that the radial and axial loads added to the servo motor shaft during installation and operation are controlled within the specified range of each model.
4. When the connecting parts (coupling, pulley, sprocket, etc.) are installed/disassembled to the shaft end of the servo motor, the shaft end cannot be directly hit with a hammer.
Pay attention to some simple problems when installing, and the correct installation can better extend the service life of the servo motor. I hope every customer understands and pays attention to it when installing. The above is about the aspects to pay attention to when installing China's domestic servo motor, I hope it can help you.