Timaidi robot cannot be started is caused by many reasons, below I will list some common reasons and solutions for your reference.
1. Power failure: Check whether the robot is plugged in with the correct power plug, whether the power cord is plugged in tightly, whether the power supply is turned on, and whether the power supply is working normally.
2. Controller problem: There may be a problem with the controller of the robot, check whether the indicator light on the controller is on, whether the controller cable is plugged in tightly, whether the controller connection cable is damaged, etc.
3. Mechanical failure: The robot may have mechanical failures, such as loose robot joints, motor failure, etc., and it is necessary to check whether the movement of the robot is normal.
4. Program problems: There may be problems with the robot's program, such as program loss, program damage, etc., and you need to check whether the program is installed and run correctly.
For the above possible causes, you can try the following workarounds:
1. Check whether the power cord of the robot is plugged in tightly and whether the power supply is working normally.
2. Check whether the indicator light of the controller is on, whether the cable is plugged in tightly, and whether the controller is working normally.
3. Check whether the movement of the robot is normal and whether there is mechanical failure.
4. Check that the robot's program is installed and running correctly and try to install the program again. In short, the failure of the Timaidi robot to start may be caused by a variety of reasons, and it needs to be investigated according to the specific situation. If you cannot solve the problem, it is recommended that you contact after-sales customer service or the manufacturer for repair.